خلاصه ماشینی:
Solar cells have an optimal working point that is able to receive the maximum and improve the quality of the power that is needed to obtain the maximum power from the photovoltaic system.
In this research, a photovoltaic system based on fuzzy control has been designed and implemented to improve the quality of power from solar cells in the MATLAB software environment.
The inverter of this circuit is switched by the PWM method in order to provide the possibility of adjusting the output voltage against average load changes, the use of controllers is distributed in the network by providing higher quality power [6-8].
In ref [11], they performed a new method to improve the efficiency of the solar system and maximize energy harvesting from photovoltaic modules by using the maximum power point.
In this research, a photovoltaic system based on phase control with the maximum point and improvement of power quality from solar cells will be designed and implemented in the MATLAB software environment and the results obtained will be compared with other works done.
/ Figure 6- membership functions 4- Designing a controller based on fuzzy logic Fuzzy control for tracking the maximum point of power generation and invert switching is the main point in designing a control method for photovoltaic connected to the grid.
A new Golden Section method-based maximum power point tracking algorithm for photovoltaic systems.
Maximum power point tracking using a GA optimized fuzzy logic controller and its FPGA implementation.
Fuzzy controller design using FPGA for photovoltaic maximum power point tracking.